Multi-use ZIF Breakout Board

Part Number: CFA10102

This generic adapter board is a huge boon to prototyping with a display. With multiple sizes and pitches of ZIF connectors, any display with 40 or fewer pins can be brought up using this board. We selected 3 of our most common number of pins for the 0.5mm pitch ZIF connectors - 40-pins, 24-pins, and 12-pins, as well as a 41-pin 0.3mm pitch connector. A display with a different number of pins can be used by aligning the display's pin 1 with pin 1 of the ZIF connector.

For OLEDs that require a high panel voltage or LCDs with a backlight, the board includes a voltage booster, removing the need for a power supply to provide the panel or backlight voltage.

This board also features four jumpers for each pin to connect to the low voltage net, high voltage net, or one of two ground nets. These jumpers simplify adding any necessary 0603 components to bring up the display. That means no more messy soldering on a little breakout board or complicated breadboards. Plus, the high-voltage is generated by the voltage booster, so only the low-voltage needs to be supplied externally.

This adapter board also includes multiple headers for easy signal debugging or for attaching peripheral devices.

Features:

• Four choices of ZIF connector (3 sizes of .5 mm pitch, 1 size of .3 mm pitch)
• Headers for signal debugging
• On-board variable voltage booster
• Each line can connect to two ground locations, high-voltage, and low-voltage
• Dual row header that an adapter board can be solder into so any ZIF connector can work with the board

• square_foot Physical Characteristics

  Physical Characteristics

  Weight

  50g

• picture_as_pdf Datasheets
  picture_as_pdf

  CFA10102 Datasheet
  

  
  
• download Files and Downloads
  folder_zip Hardware Design - 3D Model
  

  folder_zip Hardware Design - Hardware Build Package
  
• assured_workload Compliance Documents
  picture_as_pdf Declaration of Conformity RoHS2

  picture_as_pdf Declaration of Conformity REACH